Trigger scope rising or falling

[dmg210]

Hi,

I have taken a trigger scope of the car, pretty sure the hyundai has hall type sensors. Can anyone tell from the trigger scope if i should use the rising or falling edge signals from the crank / cam sensors?

Thanks

Trigger Scope Log.llg

[Adamw]

Either would work fine in this case but typically the falling edge will be slightly sharper.  So I would set trig 1 edge to falling, for trig 2 I would set the sync mode to "cam level" and either rising or falling would be fine (offset will change by 360 depending which one you choose).