FIS Posted January 2 Report Share Posted January 2 Happy new year2023 all, I am configuring Razor PDM. In output mode how many ADIOs pin can be joined together to get higher current capacity. Quote Link to comment Share on other sites More sharing options...
FIS Posted January 2 Author Report Share Posted January 2 Additional info related to my previous posting, on page 9 of xwiki PDM User Manual says: "The 8x ADIOs can be configured as low power outputs able to deliver 8A at 12V. They can be used as a high-side drive only. Outputs 1 to 4 are PWM output capable. Outputs can be joined together to allow the use of higher current devices." Does it means that I can wire 2 or 3 ADIO pins together? Thanks in advance Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 2 Report Share Posted January 2 Yeah, probably wont work well if you are doing PWM due to small timing differences but normal on/off will be ok. FIS 1 Quote Link to comment Share on other sites More sharing options...
FIS Posted January 3 Author Report Share Posted January 3 Thanks Adam, I am using for normal on/off, does the pin can be joined to any other pins? Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 3 Report Share Posted January 3 5 hours ago, FIS said: does the pin can be joined to any other pins? Not quite sure what you are asking here. If you are asking if it matters which ADIO's you combine, no. Quote Link to comment Share on other sites More sharing options...
FIS Posted January 3 Author Report Share Posted January 3 1 hour ago, Adamw said: If you are asking if it matters which ADIO's you combine, no. Yes that's what I mean. Sorry for my bad English Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.