Jump to content

setting up boost vs ethanol content


Recommended Posts

It looks like your Boost Table Ratio Table needs setting up properly. At the moment it will always take a 50% blend from target boost table 1 & 2 because you have no other values in the table. Perhaps something like this will be better?



This should make a linear blend between table 1 (0% ratio) and table 2 (100% ratio) when your multi-fuel blend table swings from 0 to 100%. That assumes that your multi-fuel blend table is set correctly for ethanol content.

With this set up right I don't think you need to have Ethanol as an axis on boost target table 2, as that table is only blended in as your multi-fuel value goes up. You can set that back to another value, similar to boost target table 1.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...