rune Posted February 27, 2014 Report Share Posted February 27, 2014 I have a vvti engine but the map I have is for non vvti. Its a flexfuel map and I really want to use it to save money and time.How can I fix this? Do I have to put in new values one by one? Im also installing a new aem 3.5 bar map sensor.Does someone know how to calibrate it in the ecu? Thanks Rune Quote Link to comment Share on other sites More sharing options...
smelly Posted February 27, 2014 Report Share Posted February 27, 2014 I didn't see a aem 3.5 map sensor selection in the drop down menu so I would think you select the calibration table (1-6, whatever you aren't using for something else) and then input the correct values that you should be able to find in the manual that came with the aem 3.5 bar sensor. The manual is probably on the AEM website as well if you don't have a physical copy. Hope that helps. Quote Link to comment Share on other sites More sharing options...
rune Posted February 27, 2014 Author Report Share Posted February 27, 2014 Thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted February 27, 2014 Report Share Posted February 27, 2014 You will need to calibrate the VVt manually, to give you an idea of a typical vvt map you could look at the base map for the V7-9 subaru plugins. Quote Link to comment Share on other sites More sharing options...
rune Posted February 28, 2014 Author Report Share Posted February 28, 2014 I have vvti settings.All I need is to change my non vvti map to a vvti map in a smart way Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.