Jens_l Posted January 16 Report Share Posted January 16 Hi I am trying to make a start up map for my engine with modelled fuel. But there is no base map for my engine. What values should i set in the fuel table just to get the car started and idle/cruise. Set the whole table with 50 or 80?. The engine is an old tech. 2.3 , 4 cyl 8 valve engine(Volvo B230FT) And what number should i use in fuel charge cooling coeff. when running e85 just to be close. The car was tuned in traditional mode two years ago. But i have built a new engine with ported head and higher compression so the engine needs a new tune anyway. Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 16 Report Share Posted January 16 Import the fuel table out of our Monsoon base map, that is quite generic and will run near anything. Charge cooling of 20 will be a starting point. Jens_l 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.