Andy1205 Posted January 17 Report Share Posted January 17 TRYING TO ADD AN OUTPUT FOR INJECTOR 6 FOR A CAM CONTROL SWITCHED AS THE ENGINE IM USING ON THIS APPLICATION HAS IT (GETTING BASE MAP SET UP BEFORE BUYING ECU) AND CANT GET IT TO WORK. ANY IDEAS? IF NOT I WILL JUST USE AN ENGINE WITHOUT THIS FUNCTION. Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 17 Report Share Posted January 17 In G4X you do the setup in the function that you want to use rather than on the pin like you did in our older ecu's. So for example if you want aux 5 to control the fuel pump, you dont go to aux 5 and assign fuel pump to that pin - you instead go to the fuel pump function and set aux 5 as the output there. This is to allow things like CAN or math functions etc to be used and inputs and outputs. For a switched cam this is done as a GP output, so go to Aux outputs>GP output>GP output 1, set your output to inj 6 and your activation conditions. Andy1205 1 Quote Link to comment Share on other sites More sharing options...
Andy1205 Posted January 17 Author Report Share Posted January 17 Thank you so much, knew I'd be doing something wrong XD Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.