fongs Posted February 14, 2023 Report Share Posted February 14, 2023 My understanding is that there's a hardware modification required before canbus can be utilised with the LinkPlus G3 i'm running, is that correct? And if so, what's involved/what can I check to see if it's been done It's been upgraded to the g4 firmware, so I think I'm covered there Would also like to know if the Link or Spartan 3 can wideband is compatible here Cheers Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 15, 2023 Report Share Posted February 15, 2023 I will send you a PM with some info to confirm the CAN mod. The G4 ecu cant use a CAN lambda device, only analog wideband controllers. Quote Link to comment Share on other sites More sharing options...
fongs Posted February 15, 2023 Author Report Share Posted February 15, 2023 30 minutes ago, Adamw said: I will send you a PM with some info to confirm the CAN mod. The G4 ecu cant use a CAN lambda device, only analog wideband controllers. Thanks for that Adam, although that's a shame as I was after CAN primarily for a wideband controller - analog it is! Quote Link to comment Share on other sites More sharing options...
Rennklinge Posted May 19 Report Share Posted May 19 Am 15.2.2023 um 22:49 Uhr sagte Adamw: Ich werde Ihnen eine PM mit einigen Informationen senden, um den CAN-Mod zu bestätigen. Das G4 ECU kann kein CAN-Lambda-Gerät verwenden, sondern nur analoge Breitband-Controller. Hello Adam, can you please send me these instructions too? I also have this problem that my (Protune) display shows nothing. (Linkplus Ecu G3 with G4 Update 4 connector) Thank you Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 20 Report Share Posted May 20 I have sent you a PM. Quote Link to comment Share on other sites More sharing options...
MattyC Posted October 5 Report Share Posted October 5 in the same boat as the OP, linkplus g3 with g4 firmware. if you could pm me how to check the canbus can be used. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.