fabiangt79 Posted May 11, 2023 Report Share Posted May 11, 2023 Hi, I have been trying to make a calibration to read this sensor but cant get it to run correctly under Temp 3 as oil temp. Purchased from here, there is customize datasheet for the sensor https://www.bmotorsports.com/shop/product_info.php/cPath/129_142/products_id/3192?osCsid=6g2lrbbamv86j3i2kg72ocsvh7 I did ask the supplier on this they sent me a temperature calculator, when i read as rows, the data looks incomplete. https://www.bmotorsports.com/shop/static.php/post/tempcalc I know that sensor is not supplied under Link product, not sure if you could provide some help on this? Fabian Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 11, 2023 Report Share Posted May 11, 2023 Use a cal table, set input units to ohms, output units to temperature. Go to the table then right click>import/export>import from file, choose the attached .lte. It should look like below when done. AEM 30-2012.lte Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.