Monni Posted May 12, 2023 Report Share Posted May 12, 2023 So I have wired my ecu to adu like this but can't make it further from here. How do i setup my can and transfer information ecu to adu. Im beginner so could you guys explain very simply? Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 13, 2023 Report Share Posted May 13, 2023 Is your ECU serial number >10000? Only G4's after S/N 1000 had highspeed CAN bus, earlier ones will need a modification. Your ADU configuration is wrong also, to set up the CAN in the ADU go to >project tree>add>import CANX, choose Link G4 generic dash, select all, then ok. Quote Link to comment Share on other sites More sharing options...
Monni Posted May 15, 2023 Author Report Share Posted May 15, 2023 Thank you! It's working now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.