max Posted February 12, 2015 Report Share Posted February 12, 2015 hello what should the t.p.s reading be with no input from the pedal i have done the calibration setup on it and it reads zero when no input from the pedal but i have looked through a lot of the hp academy videos and theres seems to be set around 5 % Quote Link to comment Share on other sites More sharing options...
Guest Posted February 13, 2015 Report Share Posted February 13, 2015 Hi Max, It should read zero when correctly setup and no foot is applied. One thing to keep in mind with the HP Academy videos is that most of their vehicles are using e-throttle, and vehicles that use e-throttle use the throttle body to bypass air for engine idle. This means the TPS will normally read 3 to 5% with no foot applied. Scott Quote Link to comment Share on other sites More sharing options...
max Posted February 13, 2015 Author Report Share Posted February 13, 2015 Thanks for that mines setup correct then. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.