Twincams Posted June 11, 2015 Report Share Posted June 11, 2015 I believe it's been quite a long time since some of us users have requested for changes in the VTS features, which will only be available in the next update. The last update was in 2013 and is it common practice for updates to take more than 2 years to be ready? Am I the only one who is waiting, or has everybody else who's waiting given up already?? I feel that I'm being led to believe that only the i-series owners are getting any dedicated attention and support now. Quote Link to comment Share on other sites More sharing options...
davidbek95 Posted June 11, 2015 Report Share Posted June 11, 2015 The last update was 24/6/14,thats 1year it would be good for a update. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted June 11, 2015 Report Share Posted June 11, 2015 Hi , the V series software is a very stable platform and has been for quite some time now. Unless there are bugs found, the Engineers probably won't do any updates. Remember the introduction of the i SERIES was due to the absolute limitations of the V series hardware being reached. Unless a specific feature request is wished for by multiple people I do not think we will see any more development. But this is just my opinion, not that of ELECTRONZ LIMITED themselves. Remembering I don't work for them. Simon may wish to elaborate. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Simon Posted June 11, 2015 Report Share Posted June 11, 2015 Dave is on the money. There is no future development planed for the VTS as it has been superseded by the iVTS and I Series ECUs. There will only be major bug fixes should any come to light. Quote Link to comment Share on other sites More sharing options...
Twincams Posted June 12, 2015 Author Report Share Posted June 12, 2015 Simon, I made a request for a small change in the last version back in Jan 2014. It was simply to allow Map Delta to span into negative, which was previously allowed in the much earlier versions. You were telling me the engineers were working on it, and so I have been waiting for this next update since Jan 2014. If it is really not the case anymore and is not going to happen, then please kindly let me know, thanks. Quote Link to comment Share on other sites More sharing options...
josey Posted June 12, 2015 Report Share Posted June 12, 2015 Dave is on the money. There is no future development planed for the VTS as it has been superseded by the iVTS and I Series ECUs. There will only be major bug fixes should any come to light. Is it possible to fix bug on Ethrottle? Ethrottle is not working in ON mode, even if engine is running (ecu sees rpm signal). It does work in setup mode so i didnt want to make a fuss, but bug exists. Maybe that is chance to fix all bugs and make fw update? Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted June 13, 2015 Report Share Posted June 13, 2015 Hi Josey, can you elaborate on the ETHROTTLE issue, I have many customers running E THROTTLE on V series and no issues what so ever. Are you running the latest firmware 4.10.2 Regards Dave Quote Link to comment Share on other sites More sharing options...
josey Posted June 13, 2015 Report Share Posted June 13, 2015 yes, 4.10.2 in ON mode throttle blade is not moving. in ON setup mode throttle blade is working properly tried it with started engine, same problem. i drove car in "ON setup mode" and it works. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted June 18, 2015 Report Share Posted June 18, 2015 Hi Josey, please send your PCL file. Driving the car in setup mode is very dangerous, the safety limiting strategies of the ETHROTTLE will not function. Erratic, unstable and unpredictable throttle control may occur. So is the E THROTTLE SETUP passes all setup procedures. What do you have your E THROTTLE TARGET TABLE Y AXIS set up as. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.