DerekAE86 Posted May 21, 2023 Report Share Posted May 21, 2023 I just noticed that the warm up enrich table 1 has a x-axis of 14 and y-axis of 10, but when multi-fuel is enabled table 2 gets x-asis of 16 and y-axis of 11. it's incredibly ocd - but is it possible to make them match lol Quote Link to comment Share on other sites More sharing options...
dx4picco Posted May 22, 2023 Report Share Posted May 22, 2023 Make them both 10x10 Quote Link to comment Share on other sites More sharing options...
DerekAE86 Posted May 22, 2023 Author Report Share Posted May 22, 2023 Yeah obviously. My point is I was configuring the multi-fuel stuff and had constructed a quick warmup enrich table2 and wondered why I had more resolution. I went back to table1 thinking I might have messed up and had some left over resolution but nope. Just an oddity in the software. Quote Link to comment Share on other sites More sharing options...
koracing Posted May 22, 2023 Report Share Posted May 22, 2023 What you're seeing is the difference between the "fixed" tables and the "allocatable" tables (look at table allocation). Most tables that are not always in use and that can be assigned one of the 45 available allocatable tables will usually be 11x16. Quote Link to comment Share on other sites More sharing options...
DerekAE86 Posted May 23, 2023 Author Report Share Posted May 23, 2023 7 hours ago, koracing said: What you're seeing is the difference between the "fixed" tables and the "allocatable" tables Ah that makes sense why Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.