Jump to content

help nissan stagea rb25 neo non turbo engine to rb20 turbo engine swap grey ecu plug pin out diagram help


alsimports

Recommended Posts

help nissan stagea rb25 neo non turbo engine to rb20 turbo engine swap grey ecu plug pin out diagram help

using g4x ecu on engine swap nissan stagea rb 25 non turbo auto to run rb 20 turbo manual engine.

looking for pin out of factory ecu plug or help with what pins to swap on plug to run engine

thanks

alan

 

Link to comment
Share on other sites

A multimeter set to continuity and having a good look at wire colours should give you most of the pinout.

Is your car 4wd or Rwd?

Are you using the RB25de Neo loom on the RB20det? if so you will have to either run S2 coils (built in ignitors but same mounting as S0 coils) or you will have to cut off your engine loom to coil loom plug and wire in the igniter pack from the RB20det Series 0 motor.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...