Shawneboy Posted June 27, 2023 Report Share Posted June 27, 2023 I just wanted to be clear on some labels. Is the link G4X the same as the link Atomix? Does the link atomix have an internal oxygen sensor? If not can I wire this o2 sensor I have directly to the aromix board? Quote Link to comment Share on other sites More sharing options...
koracing Posted June 27, 2023 Report Share Posted June 27, 2023 Are you sure it doesn't just say AtomX on your unit? The AtomX is a G4X model ecu version of the Link Atom meaning it uses G4X firmware and software for tuning. It does not have onboard wideband control or hardware so you can't just connect a wideband sensor to it or it's board. The Atom does have 2 temperature inputs, and 3 inputs via analog 0-5V signal and CAN bus communication input. You will need a wideband controller that can send out wideband information with either a 0-5v signal (analog output) or via CAN (CAN Output) and wire that device to the Atom accordingly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.