Kam Posted September 7, 2023 Report Share Posted September 7, 2023 Hi, While Upgrading to the latest version, I've got error code 1019 and can't fix this thing... Attached are some pics How to make this thing boot again ? Kindly Kam Quote Link to comment Share on other sites More sharing options...
Vaughan Posted September 7, 2023 Report Share Posted September 7, 2023 Did you power cycle the ECU correctly when asked to by the installer? If in doubt make sure you can see the blue light on the ECU turn off before turning the power back on as some vehicles have hold power. Another attempt at installing usually works if the ecu is power cycled properly when requested. Quote Link to comment Share on other sites More sharing options...
Kam Posted September 7, 2023 Author Report Share Posted September 7, 2023 31 minutes ago, Vaughan said: Did you power cycle the ECU correctly when asked to by the installer? If in doubt make sure you can see the blue light on the ECU turn off before turning the power back on as some vehicles have hold power. Another attempt at installing usually works if the ecu is power cycled properly when requested. Hi, Yes I did And this is a plug and play ecu, it's a board that fits in the factory ecu case, but I checked the internal green light and it did turn off... I tried 3 times with no success :( Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 7, 2023 Report Share Posted September 7, 2023 I have seen this happen on evo's before where the ecu hold power doesnt let it power cycle. Try again, but this time when you get to the power cycle step, completely disconnect the battery, or unplug the main ecu connector for about 10seconds, the reconnect and click ok to proceed. TTP 1 Quote Link to comment Share on other sites More sharing options...
Kam Posted September 9, 2023 Author Report Share Posted September 9, 2023 On 9/8/2023 at 1:39 AM, Adamw said: I have seen this happen on evo's before where the ecu hold power doesnt let it power cycle. Try again, but this time when you get to the power cycle step, completely disconnect the battery, or unplug the main ecu connector for about 10seconds, the reconnect and click ok to proceed. It worked ! Much Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.