borr Posted October 18 Report Share Posted October 18 Hi guys I tried so many ways to get work with Aem cd5 dash with one of link g4 gtr/gts plug in ecu (SN - 15593) and it’s not working can anyone please try to help me out Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 18 Report Share Posted October 18 Attach a copy of your tune and dash config, and possibly describe your wiring/CAN connection. Quote Link to comment Share on other sites More sharing options...
borr Posted October 19 Author Report Share Posted October 19 8 hours ago, Adamw said: Attach a copy of your tune and dash config, and possibly describe your wiring/CAN connection. R33 Drift.aemcd7 R33 Drift.pcl Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 20 Report Share Posted October 20 Your ECU setup looks ok but there is no CAN set up in the dash. I have added the default CAN stream to your config attached. Your ECU is also using quite old firmware so it would be a good idea to update that. R33 DriftV2.aemcd7 Quote Link to comment Share on other sites More sharing options...
GabRheault Posted October 23 Report Share Posted October 23 Hi Adamw I don't see the can communication config in the file Am I looking at the wrong place ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 24 Report Share Posted October 24 23 hours ago, GabRheault said: Am I looking at the wrong place ? Yes, AEM use port 2 for the ecu connection, you are looking at port 1. Quote Link to comment Share on other sites More sharing options...
borr Posted November 14 Author Report Share Posted November 14 Thanks Adam, problem solved) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.