Murad123 Posted October 24, 2023 Report Share Posted October 24, 2023 I have a 1jz gte with g4x extreme The engine started 100% but stop at 5000 rpm I see rpm limit activated fualt code The rpm limit setup at 7000 rpm Quote Link to comment Share on other sites More sharing options...
Vaughan Posted October 24, 2023 Report Share Posted October 24, 2023 You're probably having trigger issues, attach a PCLink log showing the issue Quote Link to comment Share on other sites More sharing options...
Murad123 Posted November 12, 2023 Author Report Share Posted November 12, 2023 After 5000 log shows 23600rpm Quote Link to comment Share on other sites More sharing options...
Rossobianconero Posted November 12, 2023 Report Share Posted November 12, 2023 you have a trigger problem, post at least the file on the ecu so we can have a look. Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 12, 2023 Report Share Posted November 12, 2023 Attach the actual log file, not a screenshot. Also a trigger scope at idle and a copy of the tune. Murad123 1 Quote Link to comment Share on other sites More sharing options...
Murad123 Posted February 15 Author Report Share Posted February 15 here the base file and the log 1jz log rpm.llg rpm limt.pclr Quote Link to comment Share on other sites More sharing options...
Vaughan Posted February 18 Report Share Posted February 18 As replied on the other new thread you made: Your trigger 2 is wired backwards so fix that. If that doesn't fix it then take a trigger scope at higher rpm and if possible higher load to see if noise is showing up in the scope. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.