lilmie28 Posted December 26, 2023 Report Share Posted December 26, 2023 Hi. i have been trying to resolve the readings on my dash. Currently only shows 1.9 bar to 2 bar reading even when boosting. Been trying to view other posts but unable to resolve this issue. Currently using Bosch pressure sensor. Oil pressure is using the same type of sensor and it works. Attached is my file 5656 operate v32.pclx Quote Link to comment Share on other sites More sharing options...
Laminar Posted December 26, 2023 Report Share Posted December 26, 2023 Does the value in PCLink not match the value on the dash? Or the values match but fuel pressure never goes above 2 bar? Return-style system? What regulator? Rising rate? Quote Link to comment Share on other sites More sharing options...
lilmie28 Posted December 26, 2023 Author Report Share Posted December 26, 2023 The values in pclink are in volts. They do change when accelerating. But fuel pressure reading never go beyond 2 bar (tested with analogue gauge and it shows 3 plus bar at idle). It is a rising rate regulator Quote Link to comment Share on other sites More sharing options...
Laminar Posted December 27, 2023 Report Share Posted December 27, 2023 Do you have a log? The main page display for your analog inputs shows volts, but if you go to a log or any of the tuning layouts it will show the fuel pressure value in kPa based on your selected sensor calibration (Bosch 10 bar). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.