Jump to content

Evo 8 expansion loom


Tonez brah

Recommended Posts

You can use your factory MAF wiring to get the IAT signal and sensor ground.

For the wideband CAN2 is what you should use, its a 5-pin connector that has ground and power. 

What's wrong with the factory fan relay and AUX 1 output?

Link to comment
Share on other sites

On 1/13/2024 at 7:33 AM, aerace_fab said:

You can use your factory MAF wiring to get the IAT signal and sensor ground.

For the wideband CAN2 is what you should use, its a 5-pin connector that has ground and power. 

What's wrong with the factory fan relay and AUX 1 output?

I was hoping to get rid of the fan relay in the evo. They are known to go faulty and was hoping to wire the fan to switch on after a certain temperature is reached. 
 

ive purchased a canbus link for the car lambda. Thank you

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...