Streetstyles Posted January 16, 2024 Report Posted January 16, 2024 Hi all, i recently wired in a new main relay, Kaizen Relay on my nissan skyline r32 with an sr20de swap, wired it to kaizens specs, have had issues with water on my connectors in the pass footwell(fixed) and i recently have been running into my ECU being on constantly even when key is off. would there be anything i should look for? im very terrible at wiring unless its displayed right out to my face... ive probed my fuses and cant find a parasitic draw on there at all. ive had water damage to my ecu connector but have been able to get it cleaned no issue, and ecu works as it should. Any ideas? Quote
Adamw Posted January 16, 2024 Report Posted January 16, 2024 Most likely a backfeed through an aux. Do you have any non-factory wiring connected to aux outputs - fuel pump, boost valve etc? Can you also explain what the Kaizen relay is connected to. Quote
Streetstyles Posted January 18, 2024 Author Report Posted January 18, 2024 hey, I have a complete wiring specialties pro harness, only things really wired were the power for the can lambda. and thats really it. the kaizen relay is connected to the main relay harness, so the kaizenrelay acts as my main relay for the car since i was having issues with my old one, and wanted to move it Quote
Adamw Posted January 18, 2024 Report Posted January 18, 2024 Can you explain the kaizen relay connection. Is it taking the place of the original ECCS relay? Is the low trigger connected to ecu pin 16? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.