1JZ TPS ISSUES

[WZRD]

1JZ TPS LOG (1).llgx 1JZ TPS Err (1).pclx

Hello i am currently having Calibration issues on my 1jz IS300. I keep facing the infamous Error 16

i have attached my tune and log if anyone can take a look and give me some pointers 

[Vaughan]

An Volt 7 is at 0.02V in that log and so is in fault, you will need to fix this, clear your fault codes and then take another log. If your APS is supposed to reach that voltage under normal operation then you will need to change the An Volt 7 fault conditions.

[WZRD]

Hello sorry for the delay in response but the issue i was facing was that my throttle body had the drift motion e throttle delete to make it fully mechanical.

Reason why the aps was never seeing more than the 0.02.