Taarks GTIR Hall sensor kit

[Dkhjr1]

I have installed the sensor kit and the ignition timing is around 40 degrees before too dead center. In the triggers menu what should I set the timing to in the calibration option?

[Adamw]

22 hours ago, Dkhjr1 said:

and the ignition timing is around 40 degrees before too dead center

Can you clarify what you are saying here - are you seeing the timing light flash at 40BTDC when checking the timing with the set base timing screen open?

[Dkhjr1]

I actually figured it out. The trigger wheel was 180 out. I didn’t have the trigger offset correct either. This is my first time attempting this and I was overthinking the setup