Jump to content

Killswitch Wiring with PDM IGN SW


Recommended Posts

I attempted to wire the killswitch per the attached diagram but it didn't quite work.

  • I ran a wire from the Z terminal to the PDM for the IGN SW pin
  • On the other side of the Z terminal I ran a jumper wire to the alternator & starter side of the power

Normally the power to the coils is run on the Z terminal which in the off position is disconnected.  I think the car has this killswitch based on the Z & W labels I'm seeing on the back.  I'm still confused as to why the car kept running with the killswitch in the off position.

PDM Killswitch Wiring (doesn't work) (1).png

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...