Jump to content

M50 pnp link g4


Murad123

Recommended Posts

pinout of the main header can be found here: https://linkecu.com/documentation/E36X.pdf (this is the G4X manual but it has a more complete main header pinout).

The internal H-Bridge pins aren't exposed on this pnp so you will have to use an external E-Throttle driver (https://dealers.linkecu.com/G4RET) with one of Aux 1-4 and one of Aux 5-8 wired to it plus an extra Aux for the E-Throttle relay and you will need to find an extra 3 An Volt inputs to be used for APS and TPS inputs.

Capture.PNG

Alternatively you can get in touch with Tech Support and get it sent back for modification to expose the internal H-Bridge pins.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...