Jump to content

JZXLink on 1UZFE


Recommended Posts

Long time listener first time caller...

I have a 1uzfe that I have almost finished wiring into my Ke70 using the factory loom and ECU. I have noticed that the JZX100 and the Series 8 RX7 use the same 100pin ECU header. 

If I were to buy a JZXLink would I be able to use it with my 1uzfe? My understanding is that the top board in the plug in ECU is essentially a G4X Xtreme and the bottom board is an adapter to the ECU header?

I assume I would need to repin some of the ecu connectors and I see that I can use expansion looms to add functionality. Are all 100pins from the header connected to the ECU? Could I repurpose auto trans pins for other jobs?

Very interested to hear your thoughts.


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...