Open Loop Idle Control bouncing

[TacticalPenguin]

Hello, I'm having an issue with open loop idle control. RPMs seem to bounce open and down when ECT is close to operating temp. Otherwise, the rest of tune is good. I provided the tune and a log at idle. Any advice is appreciated.

 

[Adamw]

It is your CLL set-up bouncing between full positive and full negative trim.  Your update rate is set to 10Hz for all RPM's, this is way too high, it would rarely ever be more than 1Hz at idle. 

[TacticalPenguin]

Thanks for the assist Adam. I adjusted the update rates and idle is now stable.