Link G4X Xtreme, PMU16 and IC7 connectivity

[Grant E30 2jz]

Hi all I’m struggling with something which might not be important but is seriously frustrating me. 
 

I am running these 3 - Link G4X Xtreme, PMU16 and IC7 dash and I currently have throttle position, air temp, coolant temp, battery voltage but I can not manage to get indicators, headlights or any of that minor data from the pmu16 to show on the dash.
 

Is this something which just needs switching/programming on the can-bus side or does my loom need to be re designed to make this work? 
 

Please let me know it’s bugging me. 
 

Thanks 

[Adamw]

2 hours ago, Grant E30 2jz said:

throttle position, air temp, coolant temp, battery voltage but I can not manage to get indicators, headlights or any of that minor data from the pmu16 to show on the dash.

Doesnt sound like it is related to Link ECU.  I dont even know if the IC7 can receive indicators etc over CAN, so you will have to first research that, if it is possible then the PMU will need to be programmed to generate those messages.  If it is not possible then you will need to hardwire those signals into the IC7.

[Grant E30 2jz]

Thanks @Adamw I will have a play when I next get some spare time 

[moneypityata]

Indicators and headlights are direct-wire to the IC7 not over CAN. Maybe reach out to Haltech to see what they have to say. But I don't think the IC7 can receive those signals over CAN.