Grant E30 2jz Posted May 5 Report Share Posted May 5 Hi all I’m struggling with something which might not be important but is seriously frustrating me. I am running these 3 - Link G4X Xtreme, PMU16 and IC7 dash and I currently have throttle position, air temp, coolant temp, battery voltage but I can not manage to get indicators, headlights or any of that minor data from the pmu16 to show on the dash. Is this something which just needs switching/programming on the can-bus side or does my loom need to be re designed to make this work? Please let me know it’s bugging me. Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 5 Report Share Posted May 5 2 hours ago, Grant E30 2jz said: throttle position, air temp, coolant temp, battery voltage but I can not manage to get indicators, headlights or any of that minor data from the pmu16 to show on the dash. Doesnt sound like it is related to Link ECU. I dont even know if the IC7 can receive indicators etc over CAN, so you will have to first research that, if it is possible then the PMU will need to be programmed to generate those messages. If it is not possible then you will need to hardwire those signals into the IC7. Quote Link to comment Share on other sites More sharing options...
Grant E30 2jz Posted May 8 Author Report Share Posted May 8 Thanks @Adamw I will have a play when I next get some spare time Quote Link to comment Share on other sites More sharing options...
moneypityata Posted May 14 Report Share Posted May 14 Indicators and headlights are direct-wire to the IC7 not over CAN. Maybe reach out to Haltech to see what they have to say. But I don't think the IC7 can receive those signals over CAN. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.