r34 GTT not starting no rpm signal

[Deklan]

hey guys,

 

Im not getting any rpm signal, and which i assume isnt allowing ignition or injectors to switch on... so no start. 

 

Could you have a look at my log and see if you can see anything out of the ordinary? 

 

Thanks heaps 

Trigger Scope - 2024-05-25 12;52;26 pm.llgx PC Datalog - 2024-05-25 12;41;10 pm.llgx

[Deklan]

Got it sorted. Nz wiring trigger kit was pinned wrong. 

 

For future peoples: The nz wiring trigger kit needs a ground and trigger signal. On the trigger sensor The white is ground, and black is trigger. Then you can find trigger and ground on factory cas wiring by looking online at pin outs, mine was black was ground, and red was trigger.