Afr500can

[randolph]

Hello all,

I want to send data from an balenger motorsport “afr500can” to link for data logging and monitoring lambda,

has anybody done this using the specific model,? I don’t see any in the can bus presets.

[Adamw]

There are templates in PCLink for the AEM and Motec streams, so they could be used, but to save making any changes in the AFR500 software, attached below is a template to receive the Ballenger "Default CAN".  To match all the other AFR500 defaults, set the bitrate to 500Kbit and the ID to 1280 in the ECU. 

Also in the ECU>Analog inputs>Lambda 1, set the sensor control to "Link CAN".

Ballenger AFR500 Default CAN 500K - USE ID 1280.lcs

[randolph]

Adam,

thank you very much, just one more thing, we are currently using 4 individual link can lambda already, any other changes that we might have to make?

we are adding the afr500 to can to free up an analogue for another purpose.

[Adamw]

In that case use this one instead, same as the one above except I have changed it to use Lambda 5 instead of Lambda 1.

[randolph]

Okay great,

will do it and get back,

thank you👍