g4x with afr's from 9 tot 50

[KennyJ]

can a Link work with these ? i plan on running a monsoon on a diesel, surplus on the diesel pump , so not controlling the engine , only boost and boost enrichments via solenoids , and logging offcourse

can it read and log these , analog or over Can , would prefer Can

 

https://www.14point7.com/products/copy-of-spartan-lambda-controller-3-adv

[Vaughan]

The build in Lambda runtimes only do 0-11 but you could feed it into a CAN Analog instead and log that. Looking at there documentation you should be able to receive it over CAN just fine but you will need to do it with custom streams to make it feed into a CAN AN instead of the Lambda runtime.

[Adamw]

An AFR of 50 assuming that is quoted in gasoline stoich is only about lambda 3.4ish, so the built in CAN lambda mode would work with that.  

[KennyJ]

allright good to hear , thanks guys

the Link can lambda isnt able to do this i assume ?

[Adamw]

The Link CAN lambda has a range of 0.65-10.0Lambda, in gasoline AFR this is about 9.55 to 147:1

[KennyJ]

well that makes things way easier , thanks guys!