How to Use the OEM（genuine） Anti-Lag System of the Evo6

[KNL]

Is it possible to activate the OEM anti-lag system of the Evo6 using an #EVO8X ?
If so, would additional wiring be required ?
(I cannot find the output location on the OEM  ECU pinout)

[Adamw]

Our wiring diagrams suggest the solenoid to control the secondary air system is connected to pin #6.  Pin 6 is not connected to an output on our plug-in so you would have connect that wire to a spare output yourself. 

[KNL]

3 hours ago, Adamw said:

Our wiring diagrams suggest the solenoid to control the secondary air system is connected to pin #6.  Pin 6 is not connected to an output on our plug-in so you would have connect that wire to a spare output yourself. 

Thank you.
Should I try to control Pin 6 with a GP PWM output using a aux output?

[Adamw]

I have never seen much info on the factory SAS, but based on the mechanical design of the valve, the size of the diaphragm, and only a small vacuum reservoir available, I would say that it is only designed as an on/off type system, not PWM.