Clutch activation switch

[Chris Forbes]

I'm wondering how everyone wires in their clucth activated switch, I'm needing to do one for flat shift but don't have a clue where to start

[Simon]

It needs to go to a Digital input on one side and to either 12V or ground on the other side of the switch.

The rest is all setup through PCLink.

[Matt Howe]

Microswitch on the clutch pedal is most common. Other methods include a strain gauge on the gear stick, gearstick button/switch, or using the neutral position sensor on the gearbox. Depends on the car and type of box as to what might be the best option.