Ignition won't advance past 12 btdc under load

[Benj]

Hi All

New to the link platform and a bit stumped. I have a log pulled from a car where under throttle the ignition wont advance past 12deg unless at idle. Ignition table is calling for 18 to 24 degress based on load (tps) but log shows it stuck at 12deg.

It has picked up some false knock and removed timing accordingly but this still doesnt account for what's happening.

Any help would be great, log and tune file attached.

(log is a bit big, link for it is here) 

https://fastupload.io/ad54469b8c20c939

Corolla.pclx

[Vaughan]

Your firmware is very old and your log isn't very useful as it has very few things in it, a PCLink log would show a lot more information. I can't see anything specific that would cause the ignition to be at 12degrees but I would start by updating to the latest firmware (6.26, you are on 6.18) definitely read the firmware/PCLink release notes for all versions between yours and the one you are installing