youask Posted June 7, 2014 Report Share Posted June 7, 2014 i got problem with fluctating trigger readings with my stock r32 gtr CAS. How do i setup my AEM wheel?? http://www.aemelectronics.com/products/sensors-connectors-accessories/nissan-cam-angle-sensor-discs trigger settings? Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted June 8, 2014 Report Share Posted June 8, 2014 The easiest solution would be to use the stock CASÂ trigger wheel. Do you still have it or only the AEM trigger disc. Regards Dave. Quote Link to comment Share on other sites More sharing options...
youask Posted June 8, 2014 Author Report Share Posted June 8, 2014 i got it but i got major problems with rpm-readings. that's why i want to change it. Â the drive is OK and the timing belt is brand new. Â Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 9, 2014 Report Share Posted June 9, 2014 http://www.linkecu.com/forums/G4Forum/750191944?b_start=0#343324915 Quote Link to comment Share on other sites More sharing options...
youask Posted June 27, 2014 Author Report Share Posted June 27, 2014 worked fined, but approx what trigger offset should i use??? Quote Link to comment Share on other sites More sharing options...
Simon Posted June 30, 2014 Report Share Posted June 30, 2014 If the single sync goes past the sensor before TDC on compression #1 by say 30deg then the offset will be -30 So to get close you need to know the position of the sync. Quote Link to comment Share on other sites More sharing options...
youask Posted July 2, 2014 Author Report Share Posted July 2, 2014 I used ~ -340' that worked great Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.