JohnV Posted September 14 Report Share Posted September 14 Hi, I have a G4+ Thunder. 2 razor PDMs, amd link strada msx dash. I'm trying to get gearbox temperature on dash, it doesn't show up in the ecu stream list in race studio, I can see it in pc link run time values, but would like to get it on the dash and add a high temp warning. also is it possible to setup a dash light/warning when traction control is active or disabled ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 14 Report Share Posted September 14 It will need a custom CAN file in dash and ECU. Attach your files and I will take a look. JohnV 1 Quote Link to comment Share on other sites More sharing options...
JohnV Posted September 14 Author Report Share Posted September 14 Thanks Adam, let me know if you need the Razor PDM files as well. 2URBO-current.pclr MXS 1.2 Strada - Link Config 2URBO.zconfig Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 15 Report Share Posted September 15 Files attached. Traction status is received on the dash by default so I only added gbox temp. LINK_JohnV Custom1_@20240915_213146_004902.xc1 2URBO custom CAN.zconfig 2URBO-current V1.1.pclr Quote Link to comment Share on other sites More sharing options...
JohnV Posted September 16 Author Report Share Posted September 16 4 hours ago, Adamw said: Files attached. Traction status is received on the dash by default so I only added gbox temp. LINK_JohnV Custom1_@20240915_213146_004902.xc1 274 kB · 3 downloads 2URBO custom CAN.zconfig 894.93 kB · 7 downloads 2URBO-current V1.1.pclr 173.73 kB · 2 downloads Thanks Adam, have loaded the new PClink and dash file, can see gear box temp in dash ecu stream, but won't read when selected , just a - in that window. What's the "Custom1" file and what do I do with it? Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 16 Report Share Posted September 16 If it is working in live measures then I think that means the channel is set up correctly. Some fields have limitations on the range of values thay can show so maybe try moving it to a different field. The .xc1 file is the CAN template, you dont need this for the dash to work, but you can import it into the protocol builder in RS3 so you can add othyer stuff to it in future without starting from scratch. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.