kiwi-racer Posted September 25 Report Share Posted September 25 Hey Guys, Im banging my head just a little against the wall here.. Im trying to get my Fuel Data, Throttle Table in Use, etc to transmit from my G5 to the AIM dash for display. I have made the following XC1 file, and here's my tune file. For some reason It's not sending, I realize if I want decimals, I need to multiply/divide it, but for some reason the multiple frames under the same stream with LS first (little) does not seem to be getting the data to the AIM. Sorry, it won't let me upload the files (I guess i have a limit) https://www.dropbox.com/scl/fi/zkyz1hrbg93sbum0lz5cf/LINK_Link-LSBMW-PDM32_-20230318_005233_002523.xc1?rlkey=7fxlodvcid5kx3gbr36x95xn4&dl=0 https://www.dropbox.com/scl/fi/swzfmztf1i8g6opbqul1v/2024-9-24-new-TBtables-CANBus.pcl5?rlkey=1migb685lekh6z35rf0z8t5ke&dl=0 Thank you Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 25 Report Share Posted September 25 The main issue I see is you didnt have the frame ID set up. I fixed some of the scaling also - all data is sent in metric units so you need to receive as metric. LINK_Link LSBMW-PDM32_001_@20240925_092950_001386.xc1 2024--9-24 new TBtables - CANBus V1.1.pcl5 Quote Link to comment Share on other sites More sharing options...
kiwi-racer Posted September 25 Author Report Share Posted September 25 Ah, thanks Adam, I did experiment with some different versions of this, I appreciate the help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.