BraydenH Posted September 30, 2024 Report Posted September 30, 2024 Hey there. I'm currently in the process of wiring an ef falcon with a g4+ storm. In order to get the factory ford DOL cluster to work I've been speaking to canbarra who says they've successfully made a can module for an older link in the past, but it used the can profile "linkbasic". Is there still this profile on the g4+ and has it changed name? Thanks Quote
Adamw Posted September 30, 2024 Report Posted September 30, 2024 We have never had any stream called "Linkbasic" as far as I know. G4 was the earliest ECU that had CAN, and this came with 3 pre-configured streams, "DisplayLink", "Generic Dash" and "Race Technology", these are all available options in G4+. (Generic dash and displaylink are pretty much the same also). What is a "DOD cluster", I have heard of EL's and similar models with aftermarket ECU's fitted and didnt think there was anything special needed for the dash? Quote
BraydenH Posted October 1, 2024 Author Report Posted October 1, 2024 Ok I will have to relay this back. From what I'm aware the DOL system is a data link between the pcm and the dash cluster. At the moment I don't have coolant temp as it uses the ecu sensor and then sends this information to the cluster. Quote
BraydenH Posted October 1, 2024 Author Report Posted October 1, 2024 Would I be able to get the can specifications for each stream? Quote
Vaughan Posted October 1, 2024 Report Posted October 1, 2024 PCLink Help Manual -> ECU Tuning Functions -> CAN -> Device Specific CAN Information Quote
BraydenH Posted October 1, 2024 Author Report Posted October 1, 2024 Pretty sure I've got it sorted, thanks guys Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.