davidgst Posted October 2, 2024 Report Posted October 2, 2024 Hello, I have a link g4x from evo 8, I soldered my green black connector to the black cable of the connector and white black to the red of the connector to the respective CAN HI and CAN low, I put them in the CAN output on pin 2 and 3 starting from right to left, and it doesn't work, can someone help me? thank you Quote
essb00 Posted October 2, 2024 Report Posted October 2, 2024 Have you done the CAN setup as per the PCLink Help File? "ECU Tuning Functions > CAN > Device Specific CAN Information > AEM X-Series UEGO Gauge". Quote
davidgst Posted October 2, 2024 Author Report Posted October 2, 2024 Yes, the problem is that it cannot find the device, Quote
essb00 Posted October 2, 2024 Report Posted October 2, 2024 Find device will not work with your AEM. Post a copy of your tune file. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.