Jump to content

Link G4 Storm setup for SR20DE (11.8:1 CR)


Carl Foreman

Recommended Posts

I'm repowering a kit car with an SR20DE (non turbo), but want to start from scratch - what addons and sensors will I need to set up the G4 with this engine? SR20DE with variable intake cam (from a Nissan Silvia S14) 4 independant intakes and throttle bodies, so MAP prefered Compression raised to 11.8:1 440cc injectors (from a GTiR) with standard FPR and Z32 300ZX 240lph fuel pump Standard SR20 dizzy for ignition, but I will get a better coil Wouldn't expect to run more than 8000rpm on the current head porting and cams No engine wiring exists Will connect into a standard manual transmission Thanks Carl

Link to comment
Share on other sites

Hi Carl!  Just the standard wire-in loom & a inlet air temp sensor are all that's required over & above the standard SR sensors.  Since no wiring exists, you'll need to do something about the plugs.  My build thread on Nissanz should have some helpful info.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...