Lars Ekman Posted July 23, 2013 Report Share Posted July 23, 2013 Hi I just installed a KnockLink G4, dont know if it behaves as it should . It sometimes take long time before the flashing blue light comes, when it comes it soon turns green and all seems normal. Do I have a pore contact with my sensor?  Regards/Lars   Quote Link to comment Share on other sites More sharing options...
Scott Posted July 24, 2013 Report Share Posted July 24, 2013 Hi Lars, How it is wired varies a little depending on whether it is a single or two pin knock sensor. If you go here: http://www.linkecu.com/products/TuningTools/knocklink_g4 and then go to the operation tab (grey box, white writing). There are two diagrams showing the recommended wiring configuration as well as some notes to help. Cheers, Scott Quote Link to comment Share on other sites More sharing options...
Simon Posted July 25, 2013 Report Share Posted July 25, 2013 If you have access to another sensor it would be worth a try. It could be that you have a very quiet engine too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.