Incognito G Posted July 9, 2009 Report Share Posted July 9, 2009 Help! I just installed by G4 Storm, I am getting an RPM reading of 0 to 200 but the logs and the ECU Tuning screen say that AF1 though AF4 and AI1 through AI4 are Not Selected. Setup is as follows: FUEL 1) Injection Mode - Sequential with Injectors wire to each Brown/Combination Wire 2) Fuel Equation = Map 3) AFR = Off 4) Master at 5ms 5) Injector Test is OFF 6) All other settings are OFF IGNITION 1) Ignition Mode = Direct Spark with Individual coils wire to each Blue/Combination Wire 2) Dwell Edge = Rising 3) Ignition Delay = 200us 4) Spark Duration = 2ms 5) Ignition Test is OFF TRIGGERS 1) Trigger = Evo 1-6 2) Trigger 1 Type = Optical/Hall wired to the CAS 3) Trigger 2 Type = Optical/Hall wired to the CAM 4) Calibrate Trigger Offset = 0 Attached is a log. Badly need help. I've been tuning other ECU's but first time I could not make a car start.log3.txt Quote Link to comment Share on other sites More sharing options...
Guest Dave Posted July 9, 2009 Report Share Posted July 9, 2009 Send through the pcl file you are using as well as a description of your set up eg engine type trigger arrangement etc and i will have a look when i get a chance Regards Dave [email protected] Quote Link to comment Share on other sites More sharing options...
Incognito G Posted July 10, 2009 Author Report Share Posted July 10, 2009 Hi David, Here is the PCL file. Hope you could help out. Another datalog showing I rpm reading until 800rpm. Did a Injector and Ignition Test and they are all firing. Regards, Ben Quote Link to comment Share on other sites More sharing options...
Guest Dave Posted July 10, 2009 Report Share Posted July 10, 2009 To help further i need to know what type of engine and what are the triggers been used as well as injector size etc regards Dave [email protected] Quote Link to comment Share on other sites More sharing options...
Incognito G Posted July 11, 2009 Author Report Share Posted July 11, 2009 Thanks Dave, Sent you an email Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.