Llewellyn Posted December 24, 2014 Report Share Posted December 24, 2014 Hi, Just got a new set of injectors (ASNU 90/2000 or FIC 1650H) to upgrade from my ID1000 injectors. Tried to input the GM Short pulse information as I am running modeled multi fuel and the table will not accept negative values. Both my injectors and the ID1300 which I have looked at have negative values required. How can I set this and get things right? Cheers, Llew Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted December 30, 2014 Report Share Posted December 30, 2014 Hi Llew, good question, I will look into it for you. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted December 31, 2014 Report Share Posted December 31, 2014 Hi, the inability to add negative values to the short pulse width adder tables will be addressed in the next firmware release. Regards Dave. Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted January 2, 2015 Report Share Posted January 2, 2015 Hi Llewellyn, No sorry I do not have an ETA for you, the firmware is being tested presently by dealers including myself. If the tune is very important to have finished unfortunately for now , the only advice I can give you is to fill all the positive value locations and make the rest (negative) values zero. Or alternatively, leave all values set to zero. Regards Dave Quote Link to comment Share on other sites More sharing options...
gojira Posted April 5, 2015 Report Share Posted April 5, 2015 same problem here with ASNU 950cc injectors. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.