Richard McGeachy Posted March 2, 2008 Report Share Posted March 2, 2008 i am running a LEM G3 with the internal 2.5 bar MAP sensor - which has been adequate to date... With a new engine build well on the way and a GT3071 (.84) to hang off the side, i'll be running somewhere around 25psi - i assume i'll need to upgrade my MAP sensor as its beyond the limit of the 2.5 bar unit (~21-22psi gauge pressure). what's involved in upgrading it? can i do it myself with the appropriate tools? is there a way around it? cheers Quote Link to comment Share on other sites More sharing options...
ashesman Posted March 2, 2008 Report Share Posted March 2, 2008 The ECU must be sent back for upgrade there is not really any other way around it. That is one of the draw backs of internal map sensors. Contact [email protected] for more info on this. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.