Stu Jones Posted August 18, 2007 Report Share Posted August 18, 2007 I've installed a G3 into a EP82 GT Starlet and can't get the thing to start. When setting the triggers on the link there seems to be a problem where when I set the tooth count to 24, store, then click anywhere else the tooth count resets to 0. I've tried using both the latest and previous versions of the PC Link software but the problem still exists. I've double checked the triggers are around the right way, and it still keeps changing back to 0. The other issue is that when I crank it over, it start building trigger errors. Really lost and need to get this thing started. Can anyone urgently help? Quote Link to comment Share on other sites More sharing options...
Stu Jones Posted August 19, 2007 Author Report Share Posted August 19, 2007 I've also noticed the same thing happens when trying to change the master fuel. It keeps reverting back to 12 every time I change it. Any ideas? Quote Link to comment Share on other sites More sharing options...
ashesman Posted August 19, 2007 Report Share Posted August 19, 2007 You must press enter after adjusting things. The cell will go blue if the adjustment has taken effect. On tables enter is not required, but it is for all other edit box's... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.