ben reeves Posted January 10, 2011 Report Share Posted January 10, 2011 Hi I have a link v14 installed into a st185 celica 3sgte the probelm i have is around 60degree engine temps the engine dies at idle cold temps and normal engine temps it runs fine. im using the standard toyota water temp sensor is there an alternative sensor i can use to change the warmup enrichment or is there something i have missed in the setup. cheers Ben Quote Link to comment Share on other sites More sharing options...
Jurgen Biggelaar Posted January 13, 2011 Report Share Posted January 13, 2011 Hi Ben. Have you tried leaning or richening the warmup number at all. There is no other setting to account for this, and the standard temp sender should work OK. Can you confirm correct operation of your existing sensor? For your info... The v14 has removed all of the warmup fueling after 70degC. Jurgen Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.