tekno Posted September 20, 2009 Report Share Posted September 20, 2009 Hi all, I have just installed a G1 Linkplus into my R31 Skyline - running an RB25DET and using a manualised/shift kitted auto. My tuner has just gone on holidays after tuning the car and whilst it idles fine and runs really well on boost, it feels dead as the engine comes up on the stall converter - around 1500-2000rpm. I have the facilities to adjust the tune - any suggestions on how? I have tried adding and subtracting a little fuel and ignition in the trouble spot but it does not seem to make much difference. Your advice is appreciated - i can provide the map if you need to check it out Tekno. Quote Link to comment Share on other sites More sharing options...
martin battye Posted September 21, 2009 Report Share Posted September 21, 2009 hello.. send me yor tune to [email protected] i'll have a quick look see if anything is obvious... Quote Link to comment Share on other sites More sharing options...
tekno Posted September 22, 2009 Author Report Share Posted September 22, 2009 Thanks Martin - I have sent the file and await your assessment! Quote Link to comment Share on other sites More sharing options...
tekno Posted September 25, 2009 Author Report Share Posted September 25, 2009 Can anyone else offer some advice... I have attached the map and would appreciate any constructive comments that could be offered. Thanks! Quote Link to comment Share on other sites More sharing options...
tekno Posted October 1, 2009 Author Report Share Posted October 1, 2009 Sorry, I only attached the .RTF data before - here is the .PCL file. Any ideas? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.