Jump to content

Re: IQ3 Dash interface with G4

Jurgen Biggelaar

Recommended Posts

Hi Mark.  Assuming you have selected the correct ECU type in the Racepack, and judging by the cable you bought am also assuming you are running it over serial and not CAN.  There can only be one of a couple things going on. 

Make sure the baud rate is set to 57600, and make sure you have unplugged the tuning cable from the ECU.  You can have a display over serial OR; tuning cable communication only at one time.

Failing this you could run it over CAN and you WILL be able to have both working at once.  Remember you must REMOVE the cable from the tuning port - Physically!


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...