Jump to content

Serial link Data log parameters

Wayne Greham

Recommended Posts

G'day Can someone please confirm that the "Oxy" parameter which is logged by serial link from a link AFM is actually the volts measured*100 i.e. where the log reads 96 does that equate to 0.96V as output from the O2 sensor. Secondly, if the VECU span equates to a range of 1V to 4.5V does that mean that a log value of VECU=255 equates to 4.5v and a log value of VECU=0 equates to 1V ? or is it the case that VECU of 0 equates to 0V and vecu of 255 equates to something else ?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...