Roger Junge Posted October 30, 2013 Report Share Posted October 30, 2013 I want to use one of my Digital input switches to start recording data logging. I had it working at one time but cant remember or find any help to perform this. Can you please help? I am using DI9-GP Input on low side active. The idea is that when I activate the toggle switch it would record until I deactivate so I can review/download the log file after my run that I am interested in. Quote Link to comment Share on other sites More sharing options...
Roger Junge Posted October 30, 2013 Author Report Share Posted October 30, 2013 Previously Roger Junge wrote: I want to use one of my Digital input switches to start recording data logging. I had it working at one time but cant remember or find any help to perform this. Can you please help? I am using DI9-GP Input on low side active. The idea is that when I activate the toggle switch it would record until I deactivate so I can review/download the log file after my run that I am interested in. I have the G4 Xtreme ECU Quote Link to comment Share on other sites More sharing options...
Simon Posted November 4, 2013 Report Share Posted November 4, 2013 You will need to go to the ECU Settings (same area you set up the I/O) then to ECU logging menu (down the bottom) From there you can set it being active based on a DI Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.